Home /

eyndrea

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 23 total)
  • eyndrea
    Participant
    in reply to: error uploading to appstore idfa #17673

    Now i'm not with this problem.I solved it. I go to explain it if someone have the same problem1- I had an app made with  kwik 3.04 and corona Version 2013.2076.2- I had no time to change to new kwikversion because I would have to change some code.3- I made some changes with kwik 3.04 in the app and after I make a build with corona Version 2013.2076.  Then app store do not approved my app because this error "Improper advertising identifier (idfa) usage"Also the same app that 3 weeks ago was aproved now was rejected.The problem was the build with corona version 2013.2076 and the new politic from app.(If you use plugins like facebook, advertiment .... you have to say it when you create the build)4- So with the same app made with kwik 3.0.4 I install Corona 2189a and test the app. (there was a message that say to me that the version made with kwik was not the same that the corona but the app was ok)5- I build the app (Corona 2189a) and after I upload to appstore and all is aproved.My Conclusion. I before version of  2189 corona insert a code in the build that is not ok with the new policy from apple (change a few days ago)If someone use plugins for facebook o ads could need to say to apple when prepare for upload the app.the post in corona labs:http://forums.coronalabs.com/topic/47227-improper-advertising-identifier-idfa-usage-your-app-contains-the-advertising-identifier-idfa-api-but-you-have-not-indicated-its-usage-on-the-prep/more information: (how to reject an app that is "waiting for upload")http://forums.coronalabs.com/topic/47306-urgent-my-app-is-rejected-because-of-idfa-today-it-was-ok-two-weeks-ago/?hl=idfahttp://forums.coronalabs.com/topic/46865-does-this-app-use-the-advertising-identifier-idfa/?hl=idfaSorry for the extension of this post

    eyndrea
    Participant
    in reply to: error uploading to appstore idfa #17669

    If some people try to build with corona version before 2189 is possible to get in problems uploading to the app to appstore.Apple have changed another time the things...you could see the solution in this posthttp://forums.coronalabs.com/topic/47227-improper-advertising-identifier-idfa-usage-your-app-contains-the-advertising-identifier-idfa-api-but-you-have-not-indicated-its-usage-on-the-prep/

    eyndrea
    Participant
    in reply to: error uploading to appstore idfa #17668

    Yes. I have dowload the corona version 2014.2189a and now it's okApproved in application loader.Not show the error.

    eyndrea
    Participant
    in reply to: error uploading to appstore idfa #17667

    the app has only images, movies and show pdfs with the get url  button in kwik.After that application loader say to me this message,I try to upload the same app that I uploaded 3 weeks ago and the xcode application loader say to me the same message. One app that was aproved 3 weeks ago now say this message.The app has not any ads. Only show photos, videos and pdf's.

    eyndrea
    Participant

    ok. thanks. I supposed it. I asked to me if some kwik user have been in the same situation and had some experience about.anyway thanks

    eyndrea
    Participant

    If some user of kwik or corona know some way or tutorial or reference to start learning about this theme it would be helpful to me to shared it herethanks

    eyndrea
    Participant
    in reply to: [NOT A BUG] apply force #17334

    Fantastic Alex. Because i could not work with apply force (kinematic) in 3.0.4 beta I suposse there was a bug and until new version of kwik  I made it work with  external code …(if hep for someone) physics.addBody(man1, "dynamic", {density=0.3, friction=0.3, bounce=0.2, radius=9}) and to eliminate ...  physics.removeBody(man1, "dynamic", {density=0.3, friction=0.3, bounce=0.2, radius=9})(in new kwik version man1 would be layer.man1But your solution will be more betterthanks I go to send to you what I mean with the transition (one mement)

    eyndrea
    Participant
    in reply to: [NOT A BUG] apply force #17331

    In the project the object is kinematic.In kwik 3.0.4 I thougt there was a bug and for this I do not comment. I was waiting for this version of kwik.So why is the apply force object for in action and button panel?I have read the tutorials and I following them and perhaps i was in a errorthanks

    eyndrea
    Participant
    in reply to: [FIXED] kwik 3.0.5 buttons panel error #16860

    Thanks Alex. I try to send to you today.

    eyndrea
    Participant
    in reply to: [FIXED] kwik 3.0.5 buttons panel error #16856

    The problem for me, is that the kwik panel interface do not open the window to create/edit  when you press to- add new button,- add action- in app project properties- multilingual project propertiesis the same for you Marina?

    eyndrea
    Participant
    in reply to: Free Coloring Book Project Template #13902

    There is nothing in dropbox folder

    eyndrea
    Participant
    in reply to: Upload an app to appstore with old kwik and corona version #15908

    Sorry but i have been testing a lot of things before.I have make the solution you say to me but does not work.Now I have sent to you two pages of the project to show  to you what I mean. I sent them to support@kwiksher.com I have a button from a group named abc. Inside abc group I have the layer named "kwklayer_x" and the layer named "barra_X". When I make the button for this group, in the over state I have the layer named "kwklay_x_over"This is an example. I have 8 groups like this. And all the 8 groups are inside a group with othe layer.This big group could be dragged by the user. But now I can not get it.

    eyndrea
    Participant
    in reply to: Upload an app to appstore with old kwik and corona version #15906

    I think you say i have to remove the button from the group.I can not remove only the over state. Can I? This field is not editableIf i remove the button from the group The error is out but when the user drag only drag the element inside the group.I had before one group named menubigInside this group there was 8 groupsInside each group there was 1 layer whith a square and a button(the button was one text)The menubig show only a part on the left of the screenThe user could drag the menu from left to right some pixels and then he could see the text and squares. Then he could press abutton to go to other pageFor this reason i had one group, inside 8groups with a square and text button (in the second app the text is multilingual)All worked fine but i can not upload to appstore with old version of corona and kwik so i have to updateIf you want You can see this app in appstore. The app name is pons quimicas. It is freeIn the section productos linea domestica you can see different linesFor example in detergentes para la ropa you can see the menubigWhen you go to one produc dragging the page to the left the menu with colors appear on the left.The user can go betwen product dragin the page but also can go to one line with the big menuIs it not possible now?

    eyndrea
    Participant
    in reply to: Upload an app to appstore with old kwik and corona version #15904

    I updated kik and corona.In this two projects i had before a group with some groups insideInside each group i had one layer and one buttonNow when export in kwik this page the log say to me that i have this errorIt say to me that the layer xxx is a button over state that can not be part of a groupRemove the layer from the groupI could in the app drag all the big group and after the user could press one button to go to other pageCan not have this now?Is not possible to drag something who include a button?Is there other way to do that?

    eyndrea
    Participant
    in reply to: external code or page elements #14461

    Fantastic, I've get  it. Thanks to Alex and KilopopNow I have some pages with the top menu, some with lateral menu, and some with top menu and lateral menu. It's not very difficult. I've seen the post http://kwikplugin.com/forums/index.php/topic,952.0.htmlNow I go to try if in the external menu is possible to have multilingual also.I've one question. If I make a request to external library withmenu = require("page_23") and after call the menu in one page withmenu.new() When I publish one page with two calls of external code is the total of variables = the variables from the pages + the variables from the external code?I say this for the problem with 200 variables

Viewing 15 posts - 1 through 15 (of 23 total)

Privacy Preference Center

Strictly Necessary

these coolies are for WP-SpamShield, gdpr-wp, woocommerce, paypal

PHPSESSID, SJECT16, JCS_INENREF, JCS_INENTIM, gdpr, woocommerce_cart_hash, woocommerce_items_in_cart, woocommerce_recently_viewed, wordpress_, wordpress_logged_in_, wordpress_sec_, wordpress_test_cookie, wp_woocommerce_session_, AKDC, akavpau_ppsd

Functionality

WordPress cookie created when auto-saving a post in the editor.

wp-saving-post, wp-settings-, wp-settings-time-

Performance

google analytic

__utma,__utmb,__utmc,__utmz,_ga,_gid,_gat

Advertising